STAYBULL MULTI-BASE™ Ladder & Roof Stabilizer

The STAYBULL MULTI‑BASE™ is a patented roof wedge and anti‑slip ladder base that multiplies your ladder’s footprint, locks it down on flat or sloped surfaces, and helps stop kick‑out where ladders normally slip.
With over 300 sq in of gripping surface, load‑distributing geometry, and BullGrip™ traction pads that suction under pressure, the MULTI‑BASE™ gives you a stable, predictable platform on hardwood, tile, decking, shingles, metal roofing, uneven yards, and pitched roofs up to 12/12.

Turn any pitch into a stable workspace.
The MULTI‑BASE™ locks onto shingles and roofing surfaces to create a secure, level platform exactly where you need it. Sit, kneel, or stand with confidence - or use it as a steady perch for tools, fasteners, hardware, or even a gallon of paint. Whether you’re installing, repairing, painting, or performing maintenance, the MULTI‑BASE™ transforms sloped roofs into safe, controlled working zones that keep your hands free and your footing solid.

Work solo with confidence. Protect the surfaces you’re on. Replace multiple single‑purpose tools with one rugged, American‑built solution that stays put under pressure.

Made in the USA. Patented. Built for real jobsites.

The STAYBULL MULTI‑BASE™ works with most standard extension ladders, step ladders, and combination ladders when used according to the ladder manufacturer’s instructions. It’s built for real‑world surfaces, including:

• Smooth interior floors (hardwood, tile, laminate)
• Composite decking and finished exterior surfaces
• Pavers, patios, and flat outdoor surfaces
• Sloped yards, uneven terrain, and loose ground
• Asphalt and architectural shingles
• Standing‑seam and corrugated metal roofing (with BullGrip™ Metal Pads installed)
• Pitched roofs up to 12/12 when used as a working platform

Note: The MULTI‑BASE™ is a stability aid - not a fall‑arrest device. Always follow proper ladder setup and jobsite safety practices.

Included:

STAYBULL MULTI‑BASE™ (fully assembled)

BullGrip™ Traction Pads (Pre‑Installed) - General‑purpose pads engineered for high‑friction grip on a wide range of surfaces, including hardwood, tile, laminate and other finished flooring, wood and composite decking, asphalt shingles, wood shakes, concrete, pavers, and most common exterior surfaces.

Micro‑suction texture helps the pads “lock down” under pressure, while the high‑durability compound resists wear across demanding jobsite conditions.

Footprint:
Over 300 sq in of gripping surface

Load Rating:
Supports up to 375 lbs (combined user + tools) on flat, appropriate surfaces Stability on sloped surfaces depends on pitch, conditions, pad type, and proper ladder setup

Construction

• Roto‑molded composite body - thick‑walled, impact‑resistant construction built to handle real jobsite abuse without cracking or deforming.
• American‑built manufacturing - consistent quality, tight tolerances, and materials chosen for durability, not shortcuts.
• Molded‑in ladder‑feet backstops - helps keep ladder feet from walking or shifting under load.
• Aggressive anti‑slip tread - provides additional foot traction when stepping on or off the ladder.
• Heavy‑duty hook‑and‑loop pad attachment system - secure, field‑serviceable pad swaps with no tools required.
• Micro‑suction pad interface - pads “lock down” under pressure for added stability on smooth or slick surfaces.
• High‑durability pad compound - resists wear on abrasive surfaces like concrete, pavers, and rough exterior materials.

Dimensions & Weight

• Length: 33 in
• Width: 16 in
• Height: 7.5 in
• Weight: 13 lb.

Ladder Fit Range

• Maximum Outside Ladder Width: 29.5 in
  (Measured from the outer edge of one ladder foot to the outer edge of the other)
• Minimum Inside Ladder Width: 11.5 in
  (Distance between the inner faces of the ladder rails)

If your ladder falls within this width range, it will seat properly into the MULTI‑BASE™ recessed ladder pockets.

Supported Ladder Types

• Step ladders
• Extension ladders
• Combination ladders
• Telescoping ladders